Important Information

All prices are for doors sizes up to 36 x 84. An oversize fee will apply to all doors larger than that size. All doors are manufactured to 1 1/16” thickness, glued and pegged with mortise and tenons to ensure strength and durability.

  • All door prices shown are for bare doors, screen frames, and brass clips to hold the screens only.
  • All doors are manufactured from quarter sawn mahogany. We use quarter sawn wood because it is stronger and less prone to warping or bending - perfect for exterior use!
  • Doors can be ordered in bare wood or primed white and all will come with screen panels.
  • Our standard screens are charcoal aluminum screening to prevent oxidation, and we offer additional options like pet and bronze screens.
  • To allow for year round use of your door, we offer fully interchangeable tempered glass storm panels. These provide light and protection from the cold and elements.
  • All doors are fluted on the front unless you request otherwise.

Get A Quote

Please fill out the form below to get a quote for this door style. Contact us if you have any questions.

Please choose the door (or doors) that you would like a quote on from the list below.

To select multiple doors when using a computer, hold down the Ctrl Key (Windows) or Command Key (Mac) while clicking on the door names.

If not 38"

See "How To Measure" instructions below

If doors are being shipped. Cost is per door.

We use only Phifer screening material.

Frames secure the screens and/or glass. The frames are anodized so the color will not flake over time. This section does not refer to a door frame as with pre-hung doors.

Glass Insert
(Screen inserts are included with every door.)

Hardware Choices

View Hardware Info

Side determined standing outside looking in. One mortise will be placed 6” from the top, one will be 6” from the bottom, and one will be on center. $50

  • Full Mortise Latch Sets: These latches are for doors with regular or heavy use. To mortise, we drill and chisel out a pocket in the wood that holds the latch. If the door will see regular use, you definitely want the full-mortise latch set instead of the rim-mount (which is only held to the door by four screws).
  •  Rim Mount Latch Sets:  These latches are for lighter use doors and do not require a mortise. We recommend a mortised latch for heavy traffic doors. 

Please make your choice from the tabs below.

Side determined by standing outside looking in. Standard height is 38" up from the bottom of the door. Please ensure this will not interfere with an existing door handle. Our latches require 1 1/4" clearance on the inside of the door.

Thank you! Your submission has been received! We will be in contact with you within 24 hours.
Oops! Something went wrong while submitting the form.
Friendship Sloop

How to Measure

To ensure proper measurements for installation, follow the picture to determine height and width of your opening. 

  • Measure the inside edge of the casing area where you will hang your new door (A, B, and C). Use the narrowest measurement for the width. 
  • Then, measure the inside height (D). This is the "opening size."
    -OR-
  • Measure the current storm/screen door that you are replacing if it fits properly.
  • Be as accurate as possible with your measurements. 
  • In some cases, it might be desirable to hire a carpenter to check your casing and provide measurements. Please show the final dimensions as Width x Height.